Absolutely not. You can not use just the end caps to seal the cut ends of LED neon flex without applying any silicone glue. An end cap alone is only a mechanical cover, not a waterproof seal. To achieve a true IP65+ rating for outdoor use, the end cap and silicone sealant must be used together as a system. Here is the technical risk of skipping the glue:
| Comparison | Using End Cap Only (No Glue) | The OneZero Professional System |
|---|---|---|
| Sealing Level | Physical Gap: Air and water can easily bypass the cap edges. | Hermetic Seal: Glue fills every micro-cavity for 100% protection. |
| Moisture Risk | Capillary Action: Humidity and rain are sucked into the flex via tiny gaps. | Total Barrier: Blocks liquid water and corrosive “damp air.” |
| LED Impact | Damage: Moisture leads to oxidation, flickering, and dead LEDs. | Longevity: Ensures the LED strip operates in a dry, safe environment. |
Technical Insight: Without neutral silicone sealant, the end cap acts like an open door for “moist air.” Once humidity enters the neon flex, it condenses into water droplets inside, which is the #1 cause of short circuits in outdoor neon signs. Do NOT use just the end caps to seal the cut ends of LED neon flex without applying any silicone glue anymore. To achieve effective waterproofing, you can refer to our 4-step waterproofing process.
Don’t let moisture ruin your project. Contact our support team for the correct “Glue + Cap” matching guide for your specific neon model. [Inquire Now]
Have other insights or questions? Let’s discuss together!
Need more help? Just click the [WhatsApp button] on the bottom right to chat with us. We’ll be happy to assist you immediately!
